5" Neckless Ball Shade Holder to fit lamp shades with a 5" opening. Outside Cap = 6 9/16" dia x 7/8" deep, Inside galvanized steel holder measures 5 15/16" x 4 15/16". This set is intended for neckless ball shades with 5" openings and should work with 12", 14" & some 16" outside diameter shades.
| Center Hole Size | : | 1/8IP |
| Diameter | : | 6-9/16" |
| Finish | : | Unfinished |
| Fitter Size | : | 5" |
| Height | : | 7/8" |
| Includes | : | Outside Cap and Steel Holder |
| Material | : | Brass/Steel |
| Suitable For Use With | : | 12 in, 14" and 16" Dia Shades |
Neckless Ball Shade Holder. 2 piece sets include an unfinished brass neckless ball holder cap for the outside of the shade, and a steel backing insert that goes inside the shade. Shade holder exterior cap is made of brass material. All shade holders are with 1/8IP slip center hole.
See Unfinished Brass Ceiling Canopy #10852U for an excellent companion for this shade holder set.
Dimensions are as follows:
11774U - 3" Neckless Ball Shade Holders will fit lamp shades with a 3" opening. Outside Cap = 4.12" dia. x 7/8" deep, inside galvanized steel holder measures 4" x 2.40". This set is intended for neckless ball shades that have 3" openings and should work with 6" outside diameters.
11792U - 4" Neckless Ball Shade Holder to fit lamp shades with a 4" opening. Outside Cap = 5 1/8" dia x 7/8" deep, Inside galvanized steel holder measures 4 3/4" x 3 5/8". This set is intended for neckless ball shades that have 4" openings and 8" to 10" outside diameters.
11793U - 5" Neckless Ball Shade Holder to fit lamp shades with a 5" opening. Outside Cap = 6 9/16" dia x 7/8" deep, Inside galvanized steel holder measures 5 15/16" x 4 15/16". This set is intended for neckless ball shades with 5" openings and should work with 12", 14" & some 16" outside diameter shades.